Flat steel boning thin 6,5mm
€2.18 per m
This width and thickness, 6.5mm x 0.4mm, is best suited for corsets as it is too weak for crinolines. The thickness of the steel is almost more important than the width, the thicker the more sturdy.
| 0.1 | - 24.9 m | €2.18 per m |
| 25 | m+ | €1.46 per m |
- Specialised in high quality stretch fabrics
- We have everything from thin stretch fabrics to sturdy corset bonings
- We offer good service and fast deliveries
- We ship world wide
- Shop, showroom and atelier at Brännkyrkagatan 54a in Stockholm
- ColourWhite
- MaterialPowder coated galvanized steel, nickel free
- Thickness0,4mm
- TypeFlat steel boning
- Width6,5mm
Description
Article no.: SN10307
Flat steel boning is used for corsets and crinolines where a sturdy support is needed. Steel boning can flex forwards and backwards, but not sideways. The thickness of the steel is almost more important than the width, the thicker the more sturdy. This width and thickness, 6.5mm x 0.4mm, is best suited for corsets as it is too weak for crinolines.
For corsetery, the ends need to be cut and filed down and then covered by metal end caps or tape, se art. Cap7. Garments with steel boning can be hand washed.
Can be purchased per meter or pack of 25m.
To buy a whole pack, add 25m to the cart.